Short answer
The fake Rendez-Vous Moonphase 240 v3 is a third revision of a replica Jaeger-LeCoultre Rendez-Vous Moon, tracked by buyers under factory batch code 240. The v3 tag means the maker reworked the moonphase disc, the dial printing and the case profile after the first two runs. It stays a replica. On most 240 v3 units the moon disc advances on a 29.5 day cycle, the case sits near the genuine medium size, and the movement is a decorated automatic rather than a Jaeger-LeCoultre caliber. Judge it on the disc, the print and the caseback, in that order.
Understanding the Fake Rendez-Vous Moonphase 240 V8
What the 240 v3 code means
Batch numbers are seller shorthand, not official model names. A 240 batch refers to a specific production run, and v3 tells you which revision of that run you are looking at. Revisions usually fix the loudest complaints from the previous version: a flat looking moon, crooked markers, a thick case, or a crown that sits too high. The code does not guarantee quality. Two sellers can call the same watch 240 v3 while shipping different watches. Always ask for photos of the exact piece, with a timestamp.
Fake Rendez-Vous Moonphase 240 V7
Prerequisites
- Reference photos of the genuine Rendez-Vous Moon, front, caseback and moon disc at full moon
- Digital calipers for case diameter, thickness and lug width
- A 10x loupe
- A timegrapher or a seller who will send a reading
- A payment method with buyer protection
How to inspect a 240 v3
- Measure the case diameter and thickness with calipers and compare both numbers to the genuine reference sheet before you discuss price.
- Check the crown position, shape and engraving under the loupe, since a short or domed crown is the fastest tell on this model.
- Set the moonphase to the full moon position and compare the moon face to reference photos for color, craters and edge finish.
- Advance the moon disc through a full 29.5 day cycle and watch for stutter, skipping or a disc that does not sit flush with the dial.
- Inspect the dial print at 10x for bleeding, uneven serifs and markers that do not align with the printed minute track.
- Compare the hands for length, polish and the correct shape at the tip, then check that the seconds hand sweeps without a visible tick.
- Turn the watch over and read the caseback engraving for depth, font weight and spacing against your reference photos.
- Listen to the rotor and wind the crown a few turns to feel for grit or a loose stem.
- Request a timegrapher reading and accept the watch only if the rate and beat error stay in a narrow band across several positions.
- Verify the lug width with calipers and test fit a strap, because a 0.5 mm mismatch will chew the spring bars.
Red flags
- The moon disc jumps instead of gliding when you advance it
- Printed text that sits low or runs into the date aperture
- A caseback with shallow laser engraving and no brushed texture
- A seller who refuses a timestamped photo of the actual unit
- A price far below the current batch range for a claimed v3
What v3 usually changes
Across the 240 line, v3 units tend to carry a redrawn moon disc with more contrast, thinner applied markers and a case that lost a fraction of a millimeter in height. Some sellers also claim an upgraded movement with a smoother sweep. Treat those claims as marketing until a timegrapher reading confirms the rate. The dial layout and the moonphase function are the two areas where a good replica and a weak one separate, so spend your inspection time there and not on packaging.
fake rendez-vous moonphase 240 v3
Before you buy
Ask for video of the moon disc advancing, a caseback photo in daylight, and a timegrapher printout. Compare all three to the genuine reference photos. If any of them is missing, walk away. A replica at this level lives or dies on the details you can photograph, so make the seller prove those details before money changes hands.